Atmel Introduces AVR Microcontrollers for Automotive Motor Control Applications

SAN JOSE, California, February 27 /PRNewswire/ --

Atmel(R) Corporation (Nasdaq: ATML) announced today the availability of a
new family of AVR(R) 8-bit microcontrollers dedicated to motor control
applications for automotive. The ATmega16M1 and ATmega32M1 are the first
devices developed for the control of sensor and sensorless brushless DC
(BLDC) motors for automotive applications.

With an increasing number of motors inside a car, automotive
manufacturers need smaller and lighter motors with higher torque than brush
motors. They are now moving to BLDC motors that require more sophisticated
electronic devices to precisely control speed and torque. This brings new
challenges; among them is high temperature -- 150 degrees Celsius -- for some
applications under the hood.

The ATmega16M1 and ATmega32M1 have been developed to serve that need and
provide an integrated solution for advanced motor control applications with
CAN and LIN connectivity. Thanks to the collaboration with Vector, the
leading manufacturer of software tools and software components for automotive
networking, a complete hardware and software networking solution is
available.

Window lift motor with anti-pinch brings a good example of the
requirement. Breaking assistance, steering wheel assistance, ventilation,
cooling, sliding doors are other examples. Finally, a new category on its own
is the admission control and turbo charger control for which the motor and
possibly its controller is exposed to elevated temperature over the standard
125 degrees Celsius (typically 150 degrees).

Based on the high performance AVR 8-bit RISC architecture, the ATmega16M1
and ATmega32M1, integrate all of the basic peripherals necessary to satisfy
the needs of complex algorithms. Integrating analog blocks like 10-bit ADC,
with differential amplifiers and programmable gain options, Analog
comparators with selectable comparison levels, interrupt on pin change I/Os.
The microcontrollers provide all necessary resources to control BLDC motors
in their system environments.

The ATmega16M1 and ATmega32M1 include independent positive and negative
comparator inputs to allow sensorless motor control with no external active
components. Three individual comparators are available for back Electro
Magnetic Field (EMF) measurements. An additional comparator is available for
over-current detection. Its reference (comparison level) can be fixed via the
DAC output or any external reference voltage. Clocked up to 64-MHz, the
12-bit versatile synchronous Power Stage Controller generates 6 complementary
programmable high speed and precision signals to control a motor's 3 half
bridges. The maximum frequency is 64 kHz, with a resulting voltage resolution
of about 1/1000. Hardware fault detection will automatically and immediately
put the motor in a safe position in case a failure is detected.

About 2 Kbytes of Flash (20 bytes of SRAM) is necessary for the low level
drivers for the PSC. Typical code size for BLDC sensor drive is about 2.7
Kbytes of Flash (about 350 bytes of SRAM). BLDC sensorless drive is about 3
Kbyte of Flash and 300 bytes of SRAM. With integrated hardware routines, the
code size for LIN is reduced to about 1 Kbyte of Flash. The code size of a
CAN stack is about 16 Kbytes to 24 Kbytes Flash. For applications that may
require more code, a 64 Kbytes version will be introduced later in 2008.

ATmega16M1 and ATmega32M1 offer a unique feature combination to safely
and securely run any brushless DC motor via the appropriate driver and power
elements. Effective Power stage controller and integrated analog functions
generate a limited number of interrupts, reducing the code size and improving
the real-time behavior of the applications.

Vector CAN and LIN Drivers -- "One of the critical requirements for using
embedded processors in the automotive market is the availability of an
effective and well-supported communication stack on CAN and LIN," said Michel
Passemard, Automotive Tactical Marketing Director of Atmel's Microcontroller
Business Unit. "The availability of the Vector CAN & LIN drivers for the
ATmega16/32M1 processor paves the way for a much broader use of Atmel's
solutions in the automotive market."

Vector has developed the CAN and LIN drivers for the Atmel ATmega16/32M1
microcontroller family. These CAN and LIN drivers will support communication
packages for all Automotive OEMs. The CAN and LIN drivers and associated
configuration and generation tools are available. The CAN OEM-specific
Communication packages, including network management, transport protocol,
diagnostics, and interaction layers, are available upon request. The LIN
communication packages, available also on request, support all protocol
versions in master or slave configurations, including transport and/or
diagnostics layers.

Development Tools -- Atmel's AVR Studio(R) and AVR JTAGICE mkII, provide
a multiplatform integrated development environment (IDE). The STK(R)524 and
STK600 with STK600-TQFP32 add-on starter kits are available to start
development. The AVRMC320 Motor Control evaluation kit is also available.

Availability and Pricing -- A version with limited features is also made
available: ATmega32C1 -- without PSC, dedicated to CAN and LIN applications.
Samples of the ATmega32M1 and ATmega32C1 are now available. They are packaged
in a 32-pin QFP/QFN. ATmega32C1, ATmega16M1 and ATmega32M1 will be qualified
at 125 degrees Celsius and 150 degrees Celsius and available for volume
production in August 2008. Prices start at US$2.34, US$2.34 and US$2.52
respectively in 10,000 quantities for the 125 degrees Celsius qualified
version.

The ATmega64M1, with 64 Kbytes Flash will be introduced in 3Q of 2008.

About Atmel

Atmel is a worldwide leader in the design and manufacture of
microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio
frequency (RF) components. Leveraging one of the industry's broadest
intellectual property (IP) technology portfolios, Atmel is able to provide
the electronics industry with complete system solutions focused on consumer,
industrial, security, communications, computing and automotive markets.

(C) 2008 Atmel Corporation. All Rights Reserved. Atmel(R), logo and
combinations thereof, AVR(R), STK(R) and others, are registered trademarks,
or trademarks of Atmel Corporation or its subsidiaries. Other terms and
product names may be trademarks of others.

Information:

For further information on AVR Automotive microcontrollers, go to:
http://www.atmel.com/products/automcu/

For further information on Vector, go to: http://www.vector-worldwide.com

Press Contacts:
    Philippe Faure, Marketing Communications Director -- Microcontrollers
    Tel: +33-2-40-18-18-87, Email: philippe.faure@atmel.com
    Helen Perlegos, Public Relations
    Tel: +1-408-487-2963, Email: hperlegos@atmel.com

    Web site: http://www.atmel.com
              http://www.vector-worldwide.com