Version history SpeedFan

<<Back

Changes from v4.37 -> v4.38

• Added full support for AMCC/3ware SMART readings
• Added full support for Intel QST
• Added full support for ADT7470
• Added full support for ADT7462
• Added full support for nVidia MCP79 SMBus
• Added full support for SiS968 SMBus

Changes from v4.36 -> v4.37

• fixed a bug where, after resuming from suspend, fan speeds were not really changed
• added full support for AMD CD5536 SMBus
• added identification of Fintek F75111R
• fixed an Exotics tab Access Violation
• fixed a bug that caused all of the EVENTS to be lost after entering CONFIGURE

Changes from v4.35 -> v4.36

• greatly improved temperature reporting for almost all nVidia video cards
• now fan speeds are lowered more aggressively
• added support for AMD K11 temperature sensor
• added full support for SMSC EMC6W201
• added full support for SMSC SCH5127
• added support for SMSC EMC2710P fan speed readings
• ARECA RAID support updated to Build 270
• added AMCC/3ware test code
• improved IT8720F identification
• fixed F1 context sensitive help key support
• better identification of DIRECT RAMBUS modules
• enabled Intel ICH8 SMBus, if needed
• identified SMSC SCH5317
• some addresses on the Asus P5N32-E SLI are no longer scanned
• some addresses on the Asus Rampage Formula are no longer scanned
• some addresses on EVGA NFORCE 680i LT SLI are no longer scanned

Changes from v4.34 -> v4.35

• released to the public the EXOTICS tab
• fixed 120 DPI issue in CONFIGURE dialog
• added full support for Areca RAID controllers
• greatly improved SCSI support
• added support for Abit uGuru 3 (uGuru 2005)
• added full support for Intel FB-DIMM temperature readings
• added full support for ITE IT8720F
• added full support for Andigilog aSC7611
• added full support for LM96000 (it was previously detected as LM85B)
• added full support for Analog Devices ADT7490
• added full support for SMSC SCH5327
• fixed Windbond W83766HG hardware monitor detection on some Asus motherboards
• improved CPU identification routines
• added support for a new revision of the WINBOND W83637HF
• added support for WINBOND W83637HF at unusual addresses
• added support for Asus F8000 at unusual addresses
• added identification of the SMSC SCH5514
• added identification of SMSC EMC2300
• added ITE IT8718F fifth fan speed reporting
• added identification of Analog Devices ADP3228
• added identification of ITE IT8512F
• added identification of Winbond W83667HG SuperIO chip
• identified a new revision of Fintek F71872 hardware monitor subsystem
• added preliminary detection of the HECI driver
• fixed a bug in SMSC LPC47M172 support code that prevented fan speeds to be properly reported
• 45nm Intel CPUs with CPUID=0x10676 now use a Tjmax value of either 105C or 90C
• added full support for nVidia MCP65 SMBus
• added full support for nVidia MCP67 SMBus
• added full support for nVidia MCP73 SMBus
• added full support for nVidia MCP78S SMBus
• added full support for VIA CX700M SMBus
• added full support for Intel 82801JIB SMBus
• fixed an issue where the Intel SMBus couldn't be accessed and messages like SMBus msg : SMB Error $14 : FAILED (50) were generated
• enabled Intel ICH8M-E SMBus device, if needed
• enabled 631xESB SMBus, if needed
• enabled SMBus on Intel ICH9R, if needed
• preliminary detection of AMD CD5536 SMBus
• some SMBus addresses on Asus Striker Extreme are no longer scanned
• SMBus is no longer scanned at address $2E on DELL XPS710
• Tyan S2927 second SMBus is no longer scanned
• some addresses on the SMBus of Asus P5NT WS are no longer scanned
• some addresses on the SMBus of the Intel DX38BT are no longer scanned
• some SMBus addresses are no longer scanned on Asus M2N32-SLI DELUXE
• the second nForce SMBus is no longer scanned on FIC AU31
• some addresses on the SMBus of Supermicro H8DCE are no longer scanned
• added some SMBus scan exclusions for Intel D5400XS
• added /NOGIVEIO command line parameter to disable access to giveio.sys
• added /NOGEFORCEROM command line switch that will prevent SpeedFan from reading nVidia GeForce ROMs (useful if it takes too much time)
• nVidia video BIOS is now stored in a file for later retrieval
• fixed an access violation under Win9x with some nVidia video cards
• battery status messages are no longer displayed
• upon resume, all controlled fans are set to 100% for half a second, then set to their minimum fan speed
• added new configuration option SHOWSTATICICON

Changes from v4.34 Beta 33 -> v4.34 Beta 34

• Adds full support for VT8251 SMBus
• Greatly improves nVidia support

Changes from v4.34 Beta 31 -> v4.34 Beta 33

• Restores DTS readings even if CPUID is limited through BIOS
• Adds native nVidia video card (excluding 8xxx) internal temperature reporting (run with /DONVIDIATEMP command line parameter to enable it)

Changes from v4.34 Beta 30 -> v4.34 Beta 31

• Improves identification
• Adds support for DTS readings on all Intel CPUs that support it

Changes from v4.34 Beta 28 -> v4.34 Beta 30

• Improves CPU identification

Changes from v4.34 Beta 23 -> v4.34 Beta 28

• Greatly improves Intel CPU identification
• Supports more hardware (like the W83793G)
• Fixes a bug with charts
• Adds, in CONFIGURE / ADVANCED, a new setting to see Intel Core temperatures in a RELATIVE or ABSOLUTE way

Changes from v4.33 -> v4.34 Beta 19

• Note: In order to run this beta, simply install SpeedFan 4.33, then replace the EXE and then run SpeedFan as usual
• Huge amount of new code and of code rewritings
• Fixes the crash on some DFI motherboards and properly identifies one revision of the IT8705F chip
• A lot of code to improve nVidia support
• Intel CORE temperatures should now properly work on all systems
• Added support for the SMBus available on several new SouthBridges
• Added support for new chips
• Added preliminary CPU identification routines needed to better support new hardware
• Improves CPU identification routines

Changes from v4.33 Beta 9 -> v4.33 Beta 18

• Improves support for nVidia video card temperature readings
• XAP support is now properly restored on program start
• 83627EHF and 83627DHG support has been improved (look at advanced options) and now you can gain control of more fans on several motherboards, like on the Asus P5B and the likes
• Added full support for Intel ICH9 and nVidia MCP55 SMBus
• Added full support for ADT7475
• Support for ITE IT871xF chips has been completely rewritten
• Properly find and use almost every kind of ITE H/M core

Changes from v4.32 -> v4.33 Beta 9

• Improves support for nVidia video card temperature readings (the same as in the control panel)
• XAP support is now properly restored on program start
• 83627EHF and 83627DHG support has been improved (look at advanced options) and now you can gain control of more fans on several motherboards, like on the Asus P5B and the likes
• Added full support for Intel ICH9 and nVidia MCP55 SMBus
• Added full support for ADT7475. Lot of improvements and bug fixes

Changes from v4.31 -> v4.32

• added a digitally signed 64 bit driver (fully tested under Vista 64 bit)
• added full support for INTEL CORE DUO internal temperature readings
• added full support for Andigilog aSC7621
• added full support for Fintek F71882F
• added xAP support to publish temperatures and fan speeds
• improved support for Fintek F71782F
• improved support for IT8716F
• renamed temperatures readings for MAX6640
• improved compatibility with Intel D975XBX2
• reduced AD7416 and AD7417 false detections
• reduced MAX6650/6651 false detections
• improved Intel SMBus routines

<<Back